| |
| Is this course right for you? |
|
| If you are interested in aeronautical, automobile and space applications, this course is for you. This program provides a holistic approach to thermal system engineering. |
|
|
|
| Accreditation, Approvals, and Recognition |
|
• Approved by AICTE
• Affiliated to VTU |
|
|
|
| Opportunities |
|
| BHEL, GMR, LANCO, NTPC, Reliance, etc. |
|
|
|
| Achievements |
 |
|
|
|
| Who heads this department? |
|
| Professor P V K Perumal |
|
|
|
Professor P V K Perumal has seven years of teaching experience, thirteen years of research experience and Nineteen years of Industry experience. He has 25 technical papers to his credit, has guided eight M.Tech thesis work and currently he is guiding one Ph.D student.
His/Her areas of interest
Turbo machinery, Unsteady Fluid flows, Robotics. |
|
|
|
Full-time faculty, with over
20 years’ experience in the Thermal Engineering field |
|
| Faculty Name |
Designation |
| Permula P V K |
HOD |
| Dr K S Badarinarayan |
Principal |
| Dr N S Parthasarathy |
Professor |
| James S Kumar |
Professor |
|
|
|
| Labs |
|
| Basic Workshop |
 |
|
Introduction to Fitting and Welding Equipments – Preparation of the Specimen for Fitting and Welding – Models like T Joint, L Joint, Lap Joint and Butt Joint in Welding – In Fitting Male and Female Part with respect to V Joint, Dovetail Joint, L Joint, T Joint, etc. |
| CAMD Lab |
|
|
Orthographic Projections – Sections of Solids – Riveted Joints – Screw Fasteners – Couplings – Assembly drawings for Screw Jack, Plumber Block, Machine Vice, Tailstock, IC engine piston, Connecting reds and tool head of a shaper. |
| CIM & automation |
|
|
Manual Part programming for turning, parting, thread cutting – operations in lathe – Drilling – Milling – Operations for different profiles. Computer Assisted Part Programming using CAPS turn, CAPS mill, See turn, See mill – using this applications simulation of lathe, milling, drilling operations. |
| Computer Aided Engineering Drawing Lab |
|
|
Geometrical Constructions - Projection of Points – Lines – Planes – Solids – Isomeric Projections and Development of Surfaces. |
| Design Lab |
|
|
Strain gauge – polarimeter – governors – dampers – journal bearing – whirling of shafts – balancing – gyroscope. |
| EC Lab |
|
|
Flash and Fire Point – Junkers Calorimeter – Planimeter - Two stroke Petrol - Four Stroke Petrol – 4 Stroke diesel engine – Electrical dynamometer – Twin Cylinder engine – Single cylinder mechanical dynamometer – VCR. |
| FM Lab |
|
|
Venturimeter – orifice meter – V notch – Impact Jet – Pelton Wheel – Francis Turbine – Kaplan turbine – Single stage and Multi stage reciprocating Pump – Blower – Compressor. |
| Foundry & Forging Lab |
|
|
Determination of the Clay content – Sand Permeability – Shear test – Compression test – Moisture content test – Foundry models like Split patterns – Single mould - double mould patterns. Demonstration of Casting Patterns – Forging models like Square nail – Square bolt – Hexagonal; bolt – Material Calculations. |
| HMT Lab |
|
|
Boiling and Condensation - Determination of Thermal Conductivity – Composite wall – Pinfin experiment – Convection – Conduction – Parallel Flow – Emissivity – Stephen Boltzmann Constant – Vapour Compression – Refrigeration. |
| Machine Shop |
|
|
Lathe Operations – Turning, Parting, Knurling, Thread Cutting, Drilling –Shaping – Milling – Gear Cutting - Simple Models – 4 models respect to lathe and 2 models respect to drilling and shaping, 1 model respect to milling. |
| Material Testing Lab |
|
|
Preparation of the Specimen – Study the Microstructure for materials like High Carbon Steel, HSS, Mild Steel, Cast Iron, Brass, Copper, Aluminum, etc, - Study the Mechanical Properties using destructive testing like Impact, Tensile, Compression, Wear, Fatigue tests – nondestructive tests like dye penetrating, magnetic detector, ultrasonic sound. |
|
|
|
|
| Events |
|
| Conferences |
 |
| Guest Lectures |
|
| Industrial Visits |
|
| Seminars |
|
| Others |
|
|
|
|
